Finishing Scansnap Operation - Fujitsu PA03541-B105 Operator's Manual

■ Finishing ScanSnap operation

Exiting "ScanSnap Manager"
Operation
Click and hold the mouse button on the ScanSnap Manager icon
select "Quit" from the menu.
HINT
Disconnecting the ScanSnap
Operati o n
1. Close the paper chute to turn off the ScanSnap.
⇒
The ScanSnap Manager icon changes to
2. Unplug the USB cable from your computer.
3. Unplug the power cable or USB bus power cable from the power outlet or computer.
HINT
38
To operate the ScanSnap, "ScanSnap Manager" must be active (stay resident).
When you want to resurrect "ScanSnap Manager," select the destination where
the ScanSnap is installed (generally, "Applications" - "ScanSnap") from Finder,
and then select "ScanSnap Manager."
(*You do not have to quit "ScanSnap Manager" under normal conditions.)
The ScanSnap is turned off in conjunction with your computer or opening/
closing of the paper chute. Ordinarily, you can forget about turning on/off the
ScanSnap being connected to your computer.
in the Dock menu, and
. The power indicator goes out.