Fujitsu PA03541-B105 Operator's Manual page 146

3. When you want to change settings for the [Scan to Print] action, click the [Application
Settings] button, and then change settings.
(When you do not want to change settings, go to
⇒
The following window appears.
In this window, you can change settings for the [Scan to Print] action as follows:
"Save scanned image" checkbox
4. Click the [OK] button.
⇒
The "Scan to Print - Options" window is closed.
5. Click the [Apply] button.
6. Click the close button
⇒
The "ScanSnap Manager - Scan and Save Settings" window is closed.
HINT
126
Printed document images are saved in PDF format.
PDF files are saved in a folder specified in the "Image saving folder" field on the
[Save] tab of the "ScanSnap Manager - Scan and Save Settings" window
55).
in the upper left corner of the window.
•
To start scanning right after selecting the profile, press the [SCAN] button
on the ScanSnap. Doing so also closes the "ScanSnap Manager - Scan
and Save Settings"
•
"Scan to Print" profile can be selected by selecting "Scan to Print" in the
"Select a Profile" window which pops up when clicking the ScanSnap
Manager icon
•
Changes you have made in the above procedure take effect from the next
time you scan documents using the profile.
For details on how to change settings, refer to
Settings" (page
Step 5.)
.
70).
(page
"4.3 Saving Scanning