Fujitsu PA03541-B105 Operator's Manual page 209

8. Install the pick roller with its shaft to the ScanSnap.
Insert the right end of the shaft to the roller bushing (right), and set the shaft to the slot while
lowering it.
Pick roller shaft
9. Rotate the roller bushing (left) by rotating it in the direction of the arrow.
Pick roller
Make sure that the pick roller is completely attached. Otherwise,
ATTENTION
document jams or other feeding errors may occur.
9.3 Replacing the Pick Roller
Pick roller
Pick roller bushing Pick roller shaft
ScanSnap S300M Operator's Guide
9
189