Table of Contents
Advertisement
If [Use Quick Menu] is not marked, scanning is performed in Profile Mode.
HINT
For how to scan the document in Profile Mode, refer to
documents in Profile Mode" (page.
Operati o n
2. Load the document onto the ScanSnap.
Refer to
Loading Documents" (page
3.
Press the [SCAN] button
⇒
This starts the scanning.
•
By default, documents are scanned in "Duplex Scan" mode when you
HINT
press the [SCAN] button. With "ScanSnap Manager," you can change the
mode to "Simplex Scan" mode.
Refer to
•
You can also start the scanning by using the ScanSnap Manager icon
Refer to
•
Do not connect or disconnect other USB devices to or from the computer
ATTENTION
during scanning.
•
Do not close the paper chute during scanning.
•
Do not switch the user to log in during the scanning operation.
⇒
The power indicator
The following window appears to indicate the scanning status.
⇒
When the scanning is complete, the ScanSnap Quick Menu appears.
"3.2 Paper Sizes of Documents to be Scanned" (page 39)
41).
on the ScanSnap.
"4.2 Changing Scanning Settings" (page 47)
in the Dock menu to select "Simplex scan" or "Duplex scan."
"4.1 About the ScanSnap Icon" (page 44)
on the ScanSnap blinks white during scanning.
ScanSnap S300M Operator's Guide
3.1 Flow of Operations
"Scanning
33).
for more details.
for more details.
and
"3.3
3
29
Advertisement
Table of Contents
Troubleshooting
