Power Outlet - Fujitsu PA03541-B105 Operator's Manual

Do not use the scanner while driving a car.
Do not use the scanner while driving a car for safety. Accidents can happen.
Do not expose the scanner to excessive heat.
Do not leave the scanner in the direct sunlight, at high temperature such as in a
car in the scorching sun, or near heating apparatus. Doing so might cause
excessive heat to build up inside the scanner, causing heating, deforming, or
melting of the scanner parts (e.g., cover), and raising the temperature inside the
scanner, which could result in fire or scanner trouble. Install the scanner in a well-
ventilated location.
Before moving the scanner, unplug the power cord from the

power outlet.

Do not move the scanner with the power and interface cables connected as this
might damage the cables, causing fire, electric shock or injuries.
Before moving the scanner, be sure to disconnect the power plug from the power
outlet, and disconnect interface cables as well. Also, make sure that the floor is
free of obstructions.
Avoid any contact when scanner is working.
Avoid getting a sleeve, necktie, or hair caught up in any scanner mechanism
when scanning as this may cause injuries.
Do not use aerosol sprays near the scanner.
Do not use any aerosol sprays or alcohol based sprays to clean the scanner.
Dust blown up by strong air from the spray may enter the inside of the scanner.
This may cause the scanner to fail or malfunction.
Sparks, caused by static electricity, generated when blowing off dust and dirt from
the outside of the scanner may cause a fire.
ScanSnap S300M Operator's Guide
xvii