Printing information pages
Printing a font sample list
To print samples of the fonts currently available for your printer:
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the up or down arrow button until
4
Press the up or down arrow button until
5
Press the up or down arrow button until
Fonts, and then press
After the font sample list prints, Ready appears.
Printing a directory list
A directory list shows the resources stored in flash memory or on the hard disk.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the up or down arrow button until
4
Press the up or down arrow button until
After the directory list prints, the printer returns to the Ready state.
Printing the print quality test pages
Print the print quality test pages to isolate print quality problems.
1
Turn the printer off.
2
Hold down
and the right arrow button while turning the printer on.
3
Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
4
Press the up or down arrow button until
The print quality test pages print.
5
Press the up or down arrow button until
Resetting the Printer appears briefly, followed by a clock, and then Ready appears.
.
Reports appears, and then press
Print Fonts appears, and then press
appears next to PCL Fonts, PostScript Fonts, or PPDS
.
.
Reports appears, and then press
Print Directory appears, and then press
Prt Quality Pgs appears, and then press
Exit Config Menu appears, and then press
Printing
82
.
.
.
.
.
.