Table of Contents
Advertisement
3
Press the up or down arrow button until
4
Press the up or down arrow button until
After the menu settings page prints, the printer returns to the Ready state.
Printing a network setup page
If the printer is attached to a network, then print a network setup page to verify the network connection. This page
also provides important information that aids network printing configuration.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press
3
Press the up or down arrow button until
4
Press the up or down arrow button until
Note: If an optional internal print server is installed, Print Network <x> Setup Page appears.
5
Check the first section on the network setup page, and confirm that Status is "Connected."
If Status is "Not Connected," the LAN drop may not be active, or the network cable may be malfunctioning. Consult
a system support person for a solution, and then print another network setup page.
Setting up the printer software
Installing printer software
A printer driver is software that lets the computer communicate with the printer. The printer software is typically
installed during the initial printer setup. If you need to install the software after setup, follow these instructions:
For Windows users
1
Close all open software programs.
2
Insert the Software and Documentation CD.
3
From the main installation dialog, click Install Printer and Software.
4
Follow the instructions on the screen.
For Macintosh users
1
Close all open software applications.
2
Insert the Software and Documentation CD.
3
From the Finder desktop, double-click the printer CD icon that automatically appears.
4
Double-click the Install Printer and Software icon.
5
Follow the instructions on the screen.
Reports appears, and then press
Menu Settings Page appears, and then press
.
Reports appears, and then press
Network Setup Page appears, and then press
Additional printer setup
38
.
.
.
.
Advertisement
Table of Contents
