Cisco WS-SUP720-3B - Supervisor Engine 720 User Manual page 25

Chapter 2 Route Switch Processors and Supervisor Engines
Table 2-1
Product Number
WS-SUP720-3BXL
Note
Supervisor Engine 32
WS-SUP32-GE-3B
WS-SUP32-10GE-3B
Note
Note
Supervisor Engine 2
WS-X6K-S2-MSFC2
WS-X6K-S2U-MSFC2
OL-10100-11
Route Switch Processor and Supervisor Engine Configurations (continued)
A CompactFlash (CF) adapter with 512-MB bootdisk is available for Sup720 modules in
Release 12.2(18)SXF and later releases. Use the Cisco part number CF-ADAPTER= for
ordering.
To run Release 12.2SRB, the Sup32 requires a minimum of 512-MB DRAM.
A CF adapter with 512-MB bootdisk is available for Sup32 modules in Release 12.2(18)SXF
and later releases. Use the Cisco part number CF-ADAPTER= for ordering.
Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide
Description
Two Ethernet uplink ports: port 1 supports a 1-Gbps SFP
•
module; port 2 is configurable with either a 1-Gbps SFP module
or a 10/100/1000-Mbps RJ-45 connector
• Integrated 720-Gbps switch fabric
PFC3BXL and MSFC3 with 2-MB NVRAM, 1-GB DRAM, and
•
64-MB bootflash; high-capacity PFC3BXL allows routing and
forwarding processes to be offloaded from the supervisor engine
to the PFC (see note below)
Two CompactFlash Type II slots
•
Requires larger power supplies and a high-speed fan tray
•
QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
•
Nine Gigabit Ethernet uplink ports: eight SFP modules and one
•
RJ-45 10/100/1000-Mbps connector
Integrated 32-Gbps switch fabric
•
PFC3B and MSFC2 daughter cards (see notes below)
•
QoS port architecture (Rx/Tx): 1p3q8t/1p3q8t
•
Two 10-Gigabit Ethernet ports (XENPAKs) and one
•
10/100/1000-Mbps connector
Integrated 32-Gbps switch fabric
•
PFC3B and MSFC2 daughter cards (see notes below)
•
QoS port architecture (Rx/Tx): 1p3q8t/1p3q8t
•
Two dual-port 1000BASE-X GBIC uplinks, 16-MB bootflash,
•
128-MB DRAM on supervisor engine and 128 MB on MSFC2
• PFC2 and MSFC2
• Fabric enabled to support optional switch fabric module (SFM2)
QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
•
Two dual-port 1000BASE-X GBIC uplinks, 32-MB bootflash,
•
256-MB DRAM on supervisor engine and 256 MB on MSFC2
PFC2 and MSFC2
•
Fabric enabled to support optional SFM2
•
QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
•
Overview
2-7