Supported Hardware - Cisco WS-SUP720-3B - Supervisor Engine 720 User Manual

Router supervisor engine and route switch processor
Table of Contents

Advertisement

Cisco 7600 Series Routers

Supported Hardware

Cisco 7600 series routers support the following hardware:
Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide
1-2
A supervisor engine (such as the Sup720, Sup 2T, Sup32, or Sup2) or Route Switch Processor
(RSP720) with modular Gigabit Ethernet uplink ports. Each supervisor engine or RSP has two
integrated daughter cards: a policy feature card (PFC) and a multilayer switch feature card (MSFC).
See the
"Overview" section on page 2-2
You can install a redundant supervisor engine or RSP in the router to provide a backup in
Note
case the active module fails. Both supervisor engines or RSPs must be identical. If the
system does not include a redundant supervisor engine or RSP, you can install another type
of module (for example, FlexWAN, OSM, or SIP and SPA) in the slot that is reserved for the
redundant processor card.
Optical Services Modules (OSMs), FlexWAN and Enhanced FlexWAN modules, recommended
Catalyst 6000 family modules, and SPA interface processors (SIPs) in any combination.
Two additional modules for the Cisco 7603 router
Three additional modules for the Cisco 7604 router
Five additional modules for the Cisco 7606 router
Eight additional modules for the Cisco 7609 router
Twelve additional modules for the Cisco 7613 router
Specific combinations of supervisor engines or RSPs and modules may not be supported in
Note
your chassis. See the Supported Hardware for Cisco 7600 Series Routers guide for
information about which combinations are not supported.
Hot-swappable fan assembly
Redundant AC-input or DC-input power supplies
Redundant AC-input or DC-input power entry modules (PEMs) (Cisco 7603 and Cisco 7606 routers
only)
An optional Switch Fabric Module (WS-X6500-SFM2) that is available with the Supervisor
Engine 2. For redundancy, you can install a redundant SFM2 module. The module that is installed
first functions as the primary module.
Chapter 1
for details.
Cisco 7600 Product Overview
OL-10100-11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7604760676137600 series

Table of Contents