Features; Table; Cisco 7600 Series Routers - Cisco WS-SUP720-3B - Supervisor Engine 720 User Manual

Chapter 1 Cisco 7600 Product Overview

Features

Table 1-1

Table 1-1
Feature
Performance
and
configuration
Supervisor
engine or route
switch
processor
OL-10100-11
lists some key features of the Cisco 7600 series routers.
Cisco 7600 Series Routers Key Features
Description
For detailed information about the features supported on Cisco 7600 series routers,
see the Cisco 7600 Series Router Cisco IOS Software Configuration Guide for the
version of software being used on the router.
Modular, upgradable feature modules for core switching logic
•
Modular Gigabit Ethernet ports that you can configure with Gigabit Interface
•
Converter (GBIC), small form-factor pluggable (SFP), XENPAK, and X2 optics
modules
Several combinations of multilayer switch feature cards (MSFCs) and policy
•
feature cards (PFCs) supported (see
MSFC5 and PFC4 or PFC4XL
–
MSFC4 and PFC3C or PFC3CXL (for the RSP720, see note below)
–
MSFC3 and PFC3B, PFC3BXL, or PFC3A (see note below)
–
MSFC2 and PFC or PFC2
–
The MSFC contains the switch processor and route processor (SP/RP) for the
•
router.
PCMCIA slot
•
Console port for terminal and modem access
•
There is no separate RP or SP for Sup 2T on the MSFC. It is a single processor
•
board.
Cisco IOS Release 15.0(1)SY1 introduces support for the Sup 2T.
Note
Note The Route Switch Processor 720 (RSP720) is the latest supervisor engine for
the Cisco 7600 series routers. It is available in Cisco IOS Release 12.2SRB
and later releases.
Note Cisco IOS Release 12.2SRC introduces support for the RSP720-10GE (an
RSP with 10 Gigabit Ethernet uplink ports).
Cisco IOS Release 12.2SXF is the last release in which the PFC3A is
Note
supported. Later releases do not support this PFC.
Cisco 7600 Series Router Supervisor Engine and Route Switch Processor Guide

Cisco 7600 Series Routers

Table 2-1):
1-3