Konica Minolta bizhub 223 User Manual page 27

2.2 Enhancing the Security Function
5
Touch [OK].
6
Make sure that a message appears prompting you to turn OFF and then ON the main power switch.
Now, turn OFF and then turn ON the main power switch.
% When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. if there is no wait period between turning the main power switch off, then on again, the
machine may not function properly.
Here is the sequence, through which the main power switch and sub power switch are turned on
and off:
Turn off the sub power switch
→
Turn on the sub power switch
% If the Enhanced Security Mode is properly set to [ON], the following icon appears at the center of
the User Authentication screen, indicating that the machine is in the Enhanced Security Mode.
bizhub 423/363/283/223
→
Turn off the main power switch
→
Turn on the main power switch
2
2-12