Smb Setting Function; Setting The Netbios Name - Konica Minolta bizhub 223 User Manual

2.22

SMB Setting Function

2.22

SMB Setting Function

When access to the machine by the Administrator of the machine through the Administrator Settings is au-
thenticated, the machine enables setting of the NetBIOS Name.

Setting the NetBIOS Name

<From the Control Panel>
0 For the procedure to call the Network Settings screen on the display, see steps 1 and 2 of page 2-70.
0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
1
Call the Network Settings screen on the display from the control panel.
2
Touch [SMB Settings].
3
Touch [Print Settings].
4
Touch [NetBIOS Name].
5
Enter the NetBIOS Name.
6
Touch [OK].
7
Touch [OK].
<From PageScope Web Connection>
0 For the procedure to access the Admin Mode, see page 2-2.
0 Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.
1
Start PageScope Web Connection and access the Admin Mode.
2
Select [SMB Setting] from the pull-down menu of Network and click [Display].
3
Click [Print Setting] from the [SMB Setting] menu.
4
Enter the NetBIOS Name in the "NetBIOS Name" box.
5
Click [OK].
bizhub 423/363/283/223
2
2-93