Names Of Lead Wires And Destinations - Eclipse CD8454 Owner's Manual

Names of lead wires and destinations (refer to Page 168)
Caution
Never connect the power supply to the speaker leads,
otherwise it cause damage to the main unit.
Note
To prevent unconnected leads from shorting out, insulate them
by wrapping their tips with electrical tape. Similarly, insulate the
ends of connected leads.
If an external amplifier is to be connected to the receiver, be
sure to ground its outside housing to the vehicle body (a metal
part).
No. Name
1 ACC
2 B+
3 Ground
4 Antenna power supply Blue
5 Illumination power supply Orange/White
6 Control power supply Blue/White
7 E-LAN terminal
8 Line-in/out terminals (Front/Hi)
9 Line-in/out terminals (Rear/Mid)
10 Line-out terminals (Nonfader/Low)
11 Speaker leads
12 Cellular phone mute
13 Digital in terminal
Wire color Destination
Red Connect where the power comes on
when the ignition is in the ACC
position.
Yellow Connect where the power is constantly
available, regardless of the ignition
switch's position.
Black Connect where good body grounding
is available.
Connect to the automatic-antenna
control terminal of the vehicle.
Connect to where power comes on
when the headlights are turned on.
Connect to the control terminal for
the external amplifier, etc.
Connect to the E-LAN terminal of the
CD changer, etc.
Connect to the RCA input connectors
of an external amplifier,or to the RCA
output connectors of a EQ.
Connect to the RCA input connectors
of a EQ, or the RCA input connectors
of a woofer amplifier.
Connect them to their respective
reads.
Pink Connect to the ground output terminal
on a mobile phone.
Connect to digital output terminal of the
CD changer.
167
Mounting instruction