Names Of Lead Wires And Destinations - Eclipse CD5435 Owner's Manual

Names of lead wires and destinations

(refer to Page 119)
● Caution ●
Never connect the power supply to the speaker leads, otherwise it
causes damage to the main unit.
● Note ●
To prevent unconnected leads from shorting out, insulate them by
wrapping their tips with electrical tape. Similarly, insulate the ends
of connected leads.
If an external amplifier is to be connected to the receiver, be sure
to ground its outside housing to the vehicle body (a metal part).
No. Name
1 ACC
2 B+
3 Ground
4 Antenna power supply
5 Illumination power
supply
6 Control power supply
7 E-LAN terminal
8 & 9 Line-out terminals
10 Line-out terminals (Nonfader)
11 Speaker leads
12 AUX in terminals
13 Genuine steering remote
control terminal
Wire color Destination
Red Connect where the power comes
on when the ignition is in the
ACC position.
Yellow Connect where the power is
constantly available, regardless
of the ignition switch's position.
Black Connect where good body
grounding is available.
Blue Connect to the automatic-antenna
control terminal of the vehicle.
Orange/white Connect to where power comes on
when the headlights are turned on.
Blue/white Connect to the control terminal
for the external amplifier, etc.
Connect to the E-LAN terminal of
the CD changer, etc.
Connect to the RCA input
connectors of an external
amplifier.
Connect to the RCA input
connectors of an external
amplifier, or to the RCA output
connectors of a EQ.
Connect them to their respective
speaker leads.
Connect to the RCA output
connectors of an external products.
Connect to the vehicle steering
remote control.
* Compatibale vehicle models
for installation : Vehicle with
voltage detection-type steering
remote control. Ask your
dealer for details.
117
Mounting instruction