Within two minutes, go to the client device and use its WPS software to join the
network without entering a password.
The router attempts to add the WPS-capable device. The WPS LED
the router blinks green. When the router establishes a WPS connection, the LED is solid
green and the router WPS screen displays a confirmation message.
Repeat Step 2 and Step 3 to add another WPS client to your network.
4.
Setup Menu
Slect Advanced > Setup to display the Setup menu. The following selections are available:
Internet Setup. This is a shortcut to the same Internet Setup screen that you can access
•
from the dashboard on the Basic Home screen. See
Wireless Setup. This is a shortcut to the same Wireless Settings screen that you can
•
access from the dashboard on the Basic Home screen. See
page 24.
Guest Network. This is a shotcut to the same Guest Network screen that you can access
•
from the dashboard on the Basic Home screen. See
WAN Setup. Internet (WAN) setup. See
•
LAN Setup. Local area network (LAN) setup. See
•
QoS Setup.Quality of Service (QoS) setup. See
•
page 40.
N600 Wireless Dual Band Gigabit Router WNDRMAC
Genie Advanced Home
Internet Setup
Basic Wireless Settings
Guest Networks
on page 34.
WAN Setup
LAN Setup
Quality of Service (QoS) Setup
33
on the front of
on page 20.
on page 27.
on page 37.
on
on