Use Netgear Genie After Installation; Upgrade Router Firmware - NETGEAR WNDRMAC User Manual

Use NETGEAR Genie after Installation

When you first set up your router, the NETGEAR Genie automatically starts when you launch
an Internet browser on a computer that is connected to the router. You can use the
NETGEAR Genie again if you want to view or change settings for the router.
Launch your browser from a computer or wireless device that is connected to the router.
1.
Type http://www.routerlogin.net or http://www.routerlogin.com.
2.
The login window displays:
Enter admin for the router user name and password for the router password, both in
3.
lowercase letters.
Note: The router user name and password are different from the user name
and password for logging in to your Internet connection. See
and Access

Upgrade Router Firmware

When you set up your router and are connected to the Internet,
for you to see if a newer firmware is available. If it is, a message is displayed on the top of the screen
See
Upgrade the Router Firmware
firmware.
Click the message when it shows up, and click Yes to upgrade the router with the latest
firmware. After the upgrade, the router restarts.
CAUTION:
Do not try to go online, turn off the router, shut down the computer, or do
anything else to the router until the router finishes restarting and the Power
LED has stopped blinking for several seconds.
N600 Wireless Dual Band Gigabit Router WNDRMAC
admin
********
on page 14 for more information.
on page 63 for more information about upgrading
Getting Started with NETGEAR Genie
the
16
Types of Logins
router automatically checks
.