Supported Power Cords And Plugs; Power Cords - Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual

Supported Power Cords and Plugs

Supported Power Cords and Plugs
Each power supply has a separate power cord. Standard power cords or jumper power cords are available
for connection to a power distribution unit having IEC 60320 C19 outlet receptacles. The jumper power
cords, for use in cabinets, are available as an optional alternative to the standard power cords.

Power Cords

The standard power cords have an IEC C19 connector on the end that plugs into the switch. The optional
jumper power cords have an IEC C19 connector on the end that plugs into the switch, and an IEC C20
connector on the end that plugs into an IEC C19 outlet receptacle.
Note Only the regular power cords or jumper power cords provided with the switch are supported.
Table C-8
their lengths in feet and meters.
Table C-8
Description
Power Cord, 125 VAC 13 A NEMA 5-15 Plug,
North America
Power Cord, 250 VAC 10 A 3112 Plug,
Australia
Power Cord, 250 VAC 10 A CEE 7/7 Plug,
EU
Power Cord, 250 VAC 10 A CEI 23-16/VII Plug,
Italy
Power Cord, 250 VAC 10 A BS1363 Plug (13 A fuse),
UK
Power Cord, 250 VAC 10 A IRAM 2073 Plug,
Argentina
Power Cord, 250 VAC 10 A MP232 Plug,
Switzerland
Power Cord, 250 VAC 10 A SABS 164/1 Plug,
South Africa
Power Cord, 250 VAC 10 A SI32 Plug,
Israel
Power Cord, 250 VAC 15 A CNS10917-2 Plug,
Taiwan
Cabinet Jumper Power Cord, 250 VAC 13 A, C14-C15
Connectors
Cisco MDS 9200 Series Hardware Installation Guide
C-8
lists the power cords for the Cisco MDS 9200, 9100, and 9020 series of switches and provides
Power Cords for the MDS 9200, 9100, and 9020 Series of Switches
Appendix C Cable and Port Specifications
Length
Feet Meters
8.2 2.5
8.2 2.5
8.2 2.5
8.2 2.5
8.2 2.5
8.2 2.5
8.2 2.5
6 1.83
14.76 4.5
13.94 4.25
4 1.22
OL-16188-01