Cisco Gigabit Ethernet Transceivers; General Specifications For Cisco Gigabit Ethernet Transceivers; Environmental And Power Requirement Specifications For Cisco Gigabit Ethernet Transceivers - Cisco AJ732A - MDS 9134 Fabric Switch Installation Manual

Appendix B Technical Specifications
•
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.

Cisco Gigabit Ethernet Transceivers

Cisco Systems provides a 1-Gbps Gigabit Ethernet SFP transceiver used on the Cisco MDS 9000 IPS
modules.
Table B-34
Transceiver Module Product Number
DS-SFP-GE-T
Note DS-SFP-GE-T is not supported on Cisco MDS 9222.

General Specifications for Cisco Gigabit Ethernet Transceivers

Table B-35
Table B-35
SFP
DS-SFP-GE-T

Environmental and Power Requirement Specifications for Cisco Gigabit Ethernet Transceivers

Table B-36
Table B-36
SFP
DS-SFP-GE-T
For information about safety, regulatory, and standards compliance, refer to the Regulatory Compliance
and Safety Information for the Cisco MDS 9000 Family.
OL-16188-01
When interoperating a Cisco 4-Gbps CWDM SFP transceiver with a Cisco 1/2-Gbps CWDM
transceiver, the speed of ports on the Cisco 4-Gbps CWDM SFP transceiver must be manually
configured to 1-Gbps or 2-Gbps.
Table B-34 lists the transceiver supported on the Cisco MDS 9216.
Cisco Gigabit Ethernet SFP Transceivers
provides the general specification for the Cisco Gigabit Ethernet SFP transceiver.
General Specification for the Cisco Gigabit Ethernet SFP Transceivers
Cable Type
Category 5 UTP
provides the environmental specifications for the Cisco Gigabit Ethernet transceivers.
Environmental Specifications for Cisco Gigabit Ethernet Transceivers
Operating
Maximum
40°C
Description
1-Gbps Ethernet SFP
Cable Distance
100 m (328 ft)
Storage
Minimum Maximum
0°C 85°C
Cisco MDS 9200 Series Hardware Installation Guide
SFP Transceiver Specifications
Minimum
-40°C
B-19