Power Consumption - Lexmark X4850 - AIO INKJETPR P/C/S 27/30PPM WLS B/G/N User Manual

O: Indicates that the content of the toxic and hazardous substance in all the homogenous materials of the part is
below the concentration limit requirement as described in SJ/T11363-2006.
X: Indicates that the content of the toxic and hazardous substance in at least one homogenous material of the part
exceeds the concentration limit requirement as described in SJ/T11363-2006.
This product is compliant with the European Union Directive 2002/95/EC concerning the restriction of use of certain
hazardous substances.
ENERGY STAR

Power consumption

Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description
Printing The product is generating hard-copy output from electronic
inputs.
Copying The product is generating hard-copy output from hard-copy
original documents.
Scanning The product is scanning hard-copy documents.
Ready The product is waiting for a print job.
Power Saver The product is in energy-saving mode.
High Off The product is plugged into a wall outlet, but the power switch
is turned off.
Low Off (<1 W Off) The product is plugged into a wall outlet, the power switch is
turned off, and the product is in the lowest possible power
consumption mode.
Off The product is plugged into a wall outlet, but the power switch
is turned off.
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
Notices
157
Power consumption (Watts)
16.4
13.6
10.3
9.2
6.2
not applicable
not applicable
0.2