Transferring Photos From A Memory Card To A Flash Drive - Lexmark X4850 - AIO INKJETPR P/C/S 27/30PPM WLS B/G/N User Manual

15
If you want to adjust the print settings:
a
Press .
b
Make your selections using the control panel buttons.
c
Press to save your selections, and then go back to the print preview screen.
16
Press to print.
Note: To prevent smudging or scratching, avoid touching the printed surface with your fingers or sharp objects.
For best results, remove each printed sheet individually from the paper exit tray, and allow the prints to dry at
least 24 hours before stacking, displaying, or storing.
Related topics:
•
"Inserting a memory card" on page 56
•
"Inserting a flash drive" on page 57
•
"Understanding the Photo Edit Mode menu" on page 81
•
"Understanding the Photo Card Mode menu" on page 80

Transferring photos from a memory card to a flash drive

1
Insert a memory card that contains the images you want to transfer.
2
After the memory card is detected, press
3
Press repeatedly until Save Photos is highlighted.
4
Press .
5
Press or to select USB Flash Drive.
6
Insert the flash drive.
7
Press .
8
Press or to highlight your selection among the following options:
•
Save All "N" Photos (Where "N" is the number of photos on the memory card detected by the printer.)
•
Save Recent Date Photos
•
Save Date Range
9
Press .
10
Follow the instructions on the control panel display of the printer.
Notes:
•
If there is not enough memory on the flash drive, a prompt appears on the display.
•
Do not remove the flash drive until a message appears on the display indicating that copying is complete.
Related topics:
•
"Inserting a memory card" on page 56
•
"Inserting a flash drive" on page 57
•
"Understanding the Photo Card Mode menu" on page 80
.
Working with photos
64