Table of Contents
Advertisement
From here
Adjustments tab
Preview area
These buttons are at the top of the Preview area:
Click
Related topics:
•
"Using the All-In-One Center" on page 90
Cropping photos using the software
You can use the Auto-crop feature to highlight certain focal points or to show only a specific portion of an image.
1
From the Finder desktop, double-click the Lexmark 4800 Series folder.
2
Double-click the Lexmark 4800 Series Center icon.
3
From the All-in-One Center dialog, click Preview/Edit.
4
Select Auto-crop sensitivity.
Note: Selecting Auto-crop sensitivity automatically selects the area to be scanned.
Go to
Brightness
Contrast
Gamma
Blur/Sharpen
Rotate Image
Invert Colors
Mirror
Defaults
Auto-crop sensitivity
Width, height, and file size
display
To
Show or hide the Scan Settings drawer.
Refresh the image in the Preview area.
Start scanning.
To
Adjust the lightness and darkness of the scanned image.
Adjust the tone of the image as it is set off against a light or
dark background.
Increase or decrease the color correction curve. Enabling
gamma lets you adjust the amount of ink on the page.
Adjust the level of sharpness of the scanned image.
Rotates the image 90 degrees clockwise per click.
Reverse the colors of the image by inverting the RGB data.
The effect created is similar to that of a film negative.
Produce a mirror image of the document or image.
Reset the Adjustment controls to the factory default settings.
See a preview of the image. Some settings in the dialog are
interactive, so you can readily view the changes on the
image as you adjust the settings. Clicking
original document and shows the recent changes in the
Preview area.
Select or clear Auto-crop sensitivity to activate or deactivate
auto-cropping. Adjust the slider to adjust cropping
sensitivity.
See the dimension of the scanned image. Select your
preferred unit of measurement from the pop-up menu.
Scanning
44
re-scans the
Advertisement
Table of Contents
Troubleshooting
