Assembling The Outer Rails (Hp 9000 Series Or Comparable Eia Rack) - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Installation Manual
San switch 2/16 version 3.1.x - installation guide
Hide thumbs
Also See for A7340A - Surestore FC 1Gb/2Gb Switch 16B:
- User manual (307 pages) ,
- Installation and reference manual (60 pages) ,
- Quick start manual (52 pages)
Table of Contents
Advertisement
Figure 17: Assembling the outer rails (HP 9000 Series or comparable EIA rack)
SAN Switch 2/16 Version 3.1.x Installation Guide
b. Depending on the rack you are using, complete one of the following
tasks:
— For an HP 9000 Series or comparable EIA rack, install two #10-32 x
1/2-inch Phillips pan-head screws with captive star lock washers and two
#10 adapter washers in the upper and lower hole locations of the right rail.
Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive
star lock washers and two #10 adapter washers in the upper and lower
hole locations of the left rail. See
Installing the SAN Switch 2/16
Figure
17.
51
Advertisement
Table of Contents
