Installing Shelf Brackets In An Hp Rack System/E Or 19-Inch Eia Rack; Shelf Brackets Mounted In Hp 9000, Hp 10000, And Hp 11000 Series Rack - HP StorageWorks Director 2/140 Installation Manual

Installing and Configuring the Director
Figure 11: Shelf brackets mounted in HP 9000, HP 10000, and HP 11000 series
rack
8. Continue to

Installing Shelf Brackets in an HP Rack System/e or 19-inch EIA Rack

The shelf brackets mount directly to the interior vertical rails of the HP rack
system/e or 19-inch EIA rack using cage nuts and Phillips panhead screws.
Note:
Use these steps to install the two shelf brackets in an HP rack system/e or 19-inch
EIA rack.
1. Determine the appropriate placement for the director inside the rack.
Note:
the rack.
46
"Attaching the Mounting Hardware to the
The four angle brackets are not used in this rack system.
HP strongly recommends installing the Director 2/140 in the lowest position in
Director" on page 47.
Director 2/140 Installation Guide