Enabling Licensed Features; Running Basic Switch Operations Using Telnet; Logging Into The Switch - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Installation Manual

Enabling Licensed Features

Licensed features such as QuickLoop and Fabric Watch are already loaded onto
the switch firmware, but must be enabled with a license key. Once you have
purchased these features you are provided with a key to unlock the feature.
Use these steps to enable a licensed feature.
1. Log in to the switch as the admin user.
2. At the command line, enter the following command:
Note:
sensitive.

Running Basic Switch Operations Using Telnet

Read the following sections to run common switch operations.

Logging into the Switch

Use these steps to log into the switch.
1. Open a telnet connection to the switch. The login prompt displays if the telnet
SAN Switch 2/16 Version 3.1.x Installation Guide
licenseAdd aaaBbbCcc
(where aaaBbbCcc is the license key for a particular feature.)
You must enter a license key for each feature to activate. License keys are case
connection successfully found the switch in the network.
Managing the SAN Switch 2/16
79