HP A7340A - Surestore FC 1Gb/2Gb Switch 16B Installation Manual page 75

Table 4: Front Panel LED Patterns During Normal Operation (Continued)
LED Location
Power Switch Below
LED Serial port
SAN Switch 2/16 Version 3.1.x Installation Guide
LED Color
Display
No light
Steady green
Slow-flashing
green
Hardware
Status
Either the switch Verify that the
is off, or boot is switch is on and
not complete, or boot has had
boot has failed. time to complete.
If there is still no
light, contact the
switch supplier.
Switch is on and No action
boot has required.
successfully
completed.
Diagnostic failure Errors may be
on one or more listed in the error
ports. log. Refer to the
HP
StorageWorks
Fabric OS
Version
3.1.x/4.1.x
Procedures
Guide for more
information.
Managing the SAN Switch 2/16
Recommended
Action
75