Switch RADIUS Configuration
To display the following form, select System > Radius.
The following table describes Switch Radius Configuration controls:
Switch RADIUS Configuration controls
Table 99
Control
Primary Radius IP Address
Secondary Radius IP Address
Radius port (1500-3000)
Radius timeout (1-10)
Radius retries (1-3)
Enable/Disable Radius Server
Enable/Disable Radius Backdoor for
telnet/ssh/http/https
Enable/Disable Radius Secure Backdoor
for telnet
Description
Configures the primary Radius server address.
Configures the secondary Radius server address.
Configures the number of the UDP port to be configured, between 1500
and 3000. The default is 1645.
Configures the amount of time, in seconds, before a Radius server
authentication attempt is considered to have failed. The default is
3 seconds.
Configures the number of failed authentication requests before switching
to a different Radius server. The default is 3 requests.
Enables or disables the Radius server.
Enables or disables the RADIUS backdoor for telnet/SSH/SCP/
HTTP/HTTPS connections.
Enables or disables the RADIUS back door using secure password for
telnet.
Configuring the switch
145