Table 35
Route Map Dashboard controls
Control
Network Filter Action Action associated with the network filter for the access list: permit or deny
Enable/Disable
Access List
Default Gateways Dashboard
To display the following form, select Layer 3 > Default Gateways (click the underlined text, not the
folder).
The following table describes the Default Gateways Dashboard controls:
Table 36
Default Gateways Dashboard controls
Control
Search Range
Search Options
Status
Description
Status of the access list: enabled or disabled.
Description
To search for a Default Gateway, enter a range of Gateway numbers in the From and To
fields.
To focus the search for a Default Gateway, enter optional search parameters:
IP Address
Subnet Mask
Default Gateway State
Fields that have a value of "any" are ignored during the search.
Choose a search operation:
or: Search for Default Gateways specified in the search range that meet any of the
criteria entered.
and: Search for Default Gateways specified in the search range that meet all of the
criteria entered.
Click Search to display Default Gateways that fit the range and meet the criteria entered.
Shows if the Default Gateway is enabled (green) or disabled (red).
Dashboard
59