HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Reference Manual page 159

Table 106 Switch Port Configuration controls
Control
PVID Tagging
Port STP
Default Port VLAN ID (1-4095)
Flow Control
Autonegotiation
Speed
Duplex mode
Enable/Disable sending Link UP/Down
Trap
Port Name
Multicast Threshold
Multicast Threshold Rate (0-262143)
Description
Disables or enables VLAN tag persistence. When disabled, the VLAN
tag is removed from packets whose VLAN tag matches the port PVID. The
default value is enabled.
Turns Spanning Tree On or Off for this port.
Sets the default VLAN number which will be used to forward frames
which are not VLAN tagged.
The default number is 1.
NOTE: VLAN 4095 is reserved for switch management.
Sets the flow control. The choices include:
Receive flow control
Transmit flow control
Both receive and transmit flow control (default)
No flow control
Enables or disables auto negotiation for the port.
Ports 19-21 are set to 10000 Mbps, and cannot be set to auto-
NOTE:
negotiate.
Sets the link speed. Not all options are valid on all ports. The choices
include:
"Any," for automatic detection (default)
10 Mbps
100 Mbps
1000 Mbps
Ports 19-21 are set to 10000 Mbps, and cannot be changed.
NOTE:
Sets the operating mode. Not all options are valid on all ports. The
choices include:
"Any," for auto negotiation (default)
Full-duplex
Half-duplex
NOTE: Ports 19-21 are set to full duplex, and cannot be changed.
Enables or disables the sending of SNMP link up and link down traps.
The default setting is enabled.
Sets a name for the port. The assigned port name appears next to the
port number on some information and statistics screens.
Enables or disables multicast threshold limit.
Limits the number of multicast packets to the specified value. If disabled
(dis), the port forwards all multicast packets.
Configures the threshold rate for multicast packets, in packets per
second.
Configuring the switch
159