Port-Security Max-Static; Port-Security Mac-Address; Port-Security Mac-Address Move - NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static

9.1.3 port-security max-static

This command sets the maximum number of statically locked MAC addresses allowed on
a specific port.
Default
Format
Mode
9.1.3.1 no port-security max-static
This command resets the maximum of statically locked MAC addresses allowed on a
specific port to its default value.
Format
Mode

9.1.4 port-security mac-address

This command adds a MAC address to the list of statically locked MAC addresses. The
is the VLAN ID.
<vid>
Format
Mode
9.1.4.1 no port-security mac-address
This command removes a MAC address from the list of statically locked MAC addresses.
Format
Mode

9.1.5 port-security mac-address move

This command converts dynamically locked MAC addresses to statically locked
addresses.
Format
Mode
Port-Based Traffic Control Commands
20
port-security max-static <maxvalue>
Interface Config
no port-security max-static
Interface Config
port-security mac-address <mac-address> <vid>
Interface Config
no port-security mac-address <mac-address> <vid>
Interface Config
port-security mac-address move
Interface Config
v1.0, November 2007
9-3