Port-Security; Port-Security Max-Dynamic - NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static

9.1.1 port-security

This command enables port locking at the system level (Global Config) or port level
(Interface Config)
Default
Format
Modes
9.1.1.1 no port-security
This command disables port locking at the system level (Global Config) or port level
(Interface Config).
Format
Modes

9.1.2 port-security max-dynamic

This command sets the maximum of dynamically locked MAC addresses allowed on a
specific port.
Default
Format
Mode
9.1.2.1 no port-security max-dynamic
This command resets the maximum of dynamically locked MAC addresses allowed on a
specific port to its default value.
Format
Mode
9-2
disabled
port-security
Global Config
Interface Config
no port-security
Global Config
Interface Config
600
port-security max-dynamic <maxvalue>
Interface Config
no port-security max-dynamic
Interface Config
v1.0, November 2007
Port-Based Traffic Control Commands