Console Port Access Commands; Configuration; Lineconfig; Section 3.3 "Console Port Access Commands - NETGEAR GSM7224R - ProSafe Switch Cli Reference Manual

Command Line Interface Reference for the ProSafe 7200R Series Layer-2 Switches with Static
There are changes detected, do you wish to save the changes permanently
(Y/N)? y
The configuration changes have been saved succesfully.
'show running-config' to see the final configuration.
Thanks for using EzConfig!

3.3 Console Port Access Commands

This section describes the commands you use to configure the console port. You can use a
serial cable to connect a management host directly to the console port of the switch.

3.3.1 configuration

This command gives you access to the Global Config mode. From the Global Config
mode, you can configure a variety of system settings, including user accounts. From the
Global Config mode, you can enter other command modes, including Line Config mode.
Format
Mode

3.3.2 lineconfig

This command gives you access to the Line Config mode, which allows you to configure
various telnet settings and the console port.
Format
Mode
Administrative Access Commands
configuration
Privileged EXEC
lineconfig
Global Config
v1.0, November 2007
Please enter
3-7