Printer Mechanism Removal - Epson LQ 1050 - B/W Dot-matrix Printer Technical Manual

4.2.5.1

Printer Mechanism Removal

Remove the upper case (Refer to Section 4.2. 1.).
Step 1:
Step 2: Remove the push tractor unit (Refer to Section 4.2.3.).
Step 3: Disconnect connectors CN4, CN5, CN6, CN7, CN8, CN9, and CN 10 from the pEG)( board (Refer
to Figure 4-1 O.).
Step 4:
For the FX-850 remove the three screws, or for the FX-1 050 remove the four screws, CPS(0)
(3 X 6), which attach the ground plates to base frame.
Step 5:
For the FX-850 remove the four screws, or for the FX-105O remove the five screws, CBB (0)
(4 X 25), securing the printer mechanism to the lower case.
Figure 4-15. Printer Mechanism Removal
4-13
REV.-A