Setting The Sensitivity - Pentax Optio W80 Manual

e_kb485.book Page 119 Friday, July 3, 2009 9:18 AM

Setting the Sensitivity

You can select the sensitivity to suit the brightness of the surroundings.
The sensitivity is automatically adjusted by the camera. (Sensitivity 64-
AUTO
800)
64
The lower the sensitivity, the less noise that affects the image. The
100
shutter speed will be slower in low light conditions.
200
400
800
1600
Higher sensitivity settings use faster shutter speeds in low light
3200 conditions to reduce camera shake, but the image may be affected
by noise.
6400
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Sensitivity].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the sensitivity.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture mode.
Rec. Mode 2/4
AE Metering
Sensitivity AUTO
ISO Corction in AUTO 64
EV Compensation 100
200
Movie
D-Range Setting 400
MENU Cancel OK OK OK OK
3
119