Powering The Camera; Charging The Battery - Pentax MX-1 Operating Manual

Powering the Camera

Charging the Battery

1
Use the supplied battery charger (D-BC106) to charge the supplied
rechargeable lithium-ion battery (D-LI106) before using it in the camera
for the first time or after a long period of non-use, or when the [Battery
depleted] message appears.
Note: AC plug cord "Listed, Type SPT-2 or NISPT-2, 18/2 flexible
cord, rated 125 V, 7A, minimum 6 ft (1.8 m)"
Charging indicator
While charging: Lights
Charging finished: Turns off
1
Connect the AC plug cord to the battery charger.
2
Plug the AC plug cord into the power outlet.
3
Place the battery in the battery charger so that the
PENTAX logo is facing up.
The charging indicator lights while the battery is charging and turns off
when charging is finished.
4
Remove the battery from the battery charger when
charging is finished.
38
Battery
3
1
Battery charger
2
To power
outlet
AC plug
cord