Envelopes - Epson LX-1170+II User Manual

Load labels the same way as you would load ordinary
continuous paper. See "Printing with the pull tractor" for
loading instructions.
Because labels are especially sensitive to temperature and
humidity, use them only under normal operating conditions.
Do not leave labels loaded in the printer between jobs; they
curl around the platen and may jam when you resume
printing.
To remove the labels from the printer, tear off the fresh supply
at the bottom of the printer; then press LF/FF to advance the
remaining labels out of the printer.
Caution:
c
Never feed labels backwards through the printer; they can easily
peel off the backing sheet and jam the printer. If a label does become
stuck in the printer, contact your dealer.

Envelopes

You can feed envelopes individually using the paper guide. Keep
the following tips in mind:
Before loading an envelope, set the paper thickness lever to
the proper position. See "Adjusting the paper thickness
lever".
To load an envelope, follow the steps in "Loading single
sheets". Insert the wide edge of the envelope into the printer
first, printable-side down. When you insert the envelope
between the paper guides, push it firmly and hold it until it
feeds into the printer.
Use envelopes only under normal temperature and humidity
conditions.
36