Continuous Paper Does Not Feed Properly - Epson LX-1170+II User Manual

Wide- format 9- pin printer
Table of Contents

Advertisement

Continuous paper does not feed properly

The tractor does not feed the paper.
Cause
The paper release lever may be
in the wrong position.
The paper may have come off
the tractor.
Paper feeding is crooked or the paper jams.
Cause
The paper supply is
obstructed.
The paper supply is too far
away from the printer.
The printer cover may be
opened.
The edge guide positions may
be incorrect.
The holes on the sides of the
paper are misaligned.
Your paper may be the wrong
size or thickness for the
printer.
What to do
Check that the paper release lever is
pulled forward to the continuous-paper
position. If not, turn off the printer,
move the lever, and turn it on again.
Reattach the paper to the tractor.
What to do
Make sure the paper supply is not
obstructed by a cable or some other
object.
Make sure that your paper supply is
within 1 meter (3 feet) of the printer.
Close the printer cover.
Position the edge guides at the
diamond-shaped guide marks.
Check that the holes on the sides of the
paper are aligned with each other. Also
make sure the sprocket units are locked
and their covers are closed.
Make sure that the paper size and
thickness are within the specified
ranges. See "Paper" for information on
the continuous paper specifications.
97

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lx-300+iiLx-1170ii

Table of Contents