Roll Paper Holder - Epson LX-1170+II User Manual

Wide- format 9- pin printer
Table of Contents

Advertisement

Roll paper holder

The optional roll paper holder (#8310) allows you to use your
printer with 216 mm (8.5 inch) roll paper like that used with telex
machines. This option is not available in all countries.
Follow these steps to install and use the roll paper holder:
1. Turn off the printer and remove the paper guide.
2. Position the roll paper holder beneath the printer as shown
below. Fit the two holes in the base onto the two positioning
pegs on the bottom of the printer.
c
3. Push the paper release lever to the single-sheet position.
Caution:
Be careful to avoid dropping the roll paper holder when lifting
the printer. Only the printer's weight holds it in place.
117

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lx-300+iiLx-1170ii

Table of Contents