Table of Contents
Advertisement
Options
When you use the cut-sheet feeder, the paper does not
feed properly
The paper does not feed.
Cause
The cut-sheet feeder may be
incorrectly installed on the
printer.
The paper release lever may be
in the wrong position.
You may have loaded too
many sheets in the bin.
Paper may be jammed near the
print head.
The edge guide positions may
be incorrect.
There may be only one sheet
left in the bin.
What to do
Reinstall it as described under
"Cut-sheet feeder".
Check that the paper release lever is
pushed back to the single-sheet position.
Remove some sheets. See "Paper" for
information on the types and quantity of
paper that can be loaded with the
cut-sheet feeder.
Look for a paper jam.
Position the edge guides at the
diamond-shaped guide marks.
Add more paper.
99
Advertisement
Table of Contents
