Epson LX-1170+II User Manual page 77

3. LF/FF button**
Feeds paper line by line when pressed and released.
Ejects a single sheet or advances continuous paper to the
next top-of-form position when held down.
4. Load/Eject button**
Loads a single sheet of paper.
Ejects a single sheet of paper if a sheet is loaded.
Loads continuous paper from the standby position.
Feeds continuous paper backwards to the standby
position.
5. Pause button
Stops printing temporarily, and resumes printing when
pressed again. When pressed for three seconds, turns on the
Micro Adjust mode**. To turn off, press again.
6. Paper Out light
On when no paper is loaded in the selected paper source
or when paper is not loaded correctly.
Flashes when paper has not been fully ejected or a paper
jam has occurred.
7. Pause light
On when the printer is paused.
Flashes when the printer is in the Micro Adjust mode**.
Flashes when the print head has overheated.
* Font select : In the Micro Adjust mode, you can select the font to use for
printing by pressing the Tear Off (Font) button. The Tear Off (Font) lights turn
on, off or flash to indicate the selected font.
77