Epson AcuLaser C9300N User Manual page 185

2. If the printer is connected to a USB interface, connect your computer to the printer with a USB
cable, then turn on the printer. If the printer is connected to a parallel interface, go to step 3.
Note for Windows Vista users:
Without the Windows driver or the Adobe PS driver, the display shows "Found New Hardware." In
this case, click Ask me again later.
3. For Windows 7, click the start button, select Devices and Printers, and click the Add a printer
button.
For Windows Vista, Vista x64, XP, XP x64, Server 2008, or Server 2008 x64, click Start, point to
Printer and Faxes, and click Add a printer in the Printer Tasks menu.
For Windows 2000, Server 2003, or Server 2003 x64, click Start, point to Settings, and click
Printers. Then double-click the Add Printer icon.
4. The Add Printer Wizard appears. Then click Next.
5. Select Local printer, then click Next.
Note:
Do not select the Automatically detect and install my Plug and Play printer check box.
6. If the printer is connected to a USB interface, select USB, then click Next, or if the printer is
connected to a parallel interface, select LPT1, then click Next.
7. Click Have Disk and specify the following path for the Software Disc. If your CD/DVD drive is D:,
the path will be D:\ADOBEPS\(your printer name)\PS_SETUP. Then click OK.
Note:
Change the drive letter as needed for your system.
8. Select the printer, then click Next.
9. Follow the on-screen instructions for the rest of the installation.
10. When installation is done, click Finish.
Installing the PostScript printer driver for the network interface
Note:
❏ Set the network settings before installing the printer driver. Refer to the Network Guide that comes
with your printer for details.
Epson AcuLaser C9300 Series
About the Printer Software
User's Guide
185