Epson AcuLaser C9300N User Manual page 92

Epson AcuLaser C9300 Series User's Guide
The print data is deleted because it is incorrect.
Make sure the appropriate paper size and printer driver are used.
Can't Print Duplex
The printer has encountered problems during duplex printing. Make sure you are using an
appropriate type and size of paper for the duplex printing. The problem could also be a result of
incorrect settings for the paper source you are using. Pressing the Start/Stop button will print the rest
of the print job on only one side of the paper. Press the W Pause/Cancel button to cancel the print
job.
Can't Use Bookmark
The registered menu cannot be used because the menu is disabled by changing any settings after
registered the menu in bookmark.
Cassette Error yyy
Too many optional paper cassette units are installed to the printer. Up to three units can be installed.
Cassette2 Error yyy/Cassette3 Error yyy/Cassette4 Error yyy
An inappropriate optional paper cassette unit is installed.
CF CHECK
The printer is checking the CompactFlash memory.
Check Paper Size
The paper size setting is different from the size of paper loaded in the printer. Check to see if the correct
size of paper is loaded in the specified paper source.
To clear this error, select Clear Warning from the control panel's Reset Menu. See "How to access
the control panel menus" on page 60 for instructions.
Check Paper Type
The paper loaded in the printer does not match the paper type setting in the printer driver. Paper that
matches only the paper size setting will be used for printing.
Using the Control Panel 92