Side Connections; Remote Control - Dynex DX-L321-10A User Manual

DX-L321-10A_09-0407_MAN_ENG_V3.book Page 5 Wednesday, May 13, 2009 11:38 AM
TV components
## Component Description
4 HDMI 1 and 2 jacks Connect an HDMI device, such as a cable
box or DVD player, to one of these jacks. An
HDMI cable carries both video and audio,
so you do not need to make an audio
connection. For more information, see
"Connecting an HDMI device" on page 9.
5 COMPONENT IN (Y, Connect a component video device to
Pb, Pr) jacks these jacks. Cables are often color-coded to
connectors. For more information, see
"Connecting a component video device" on
page 10.
6 SPDIF out jack Connect a digital optical cable from this
jack to an external digital audio receiver.
7 Audio output jacks Connect audio cables (L and R) from these
(L and R) jacks to an external audio amplifier or
receiver.
8 Component audio Connect audio cables (L and R) from an
input jacks (L and external audio source, such as a DVD player,
R) 1 and 2 to these jacks.

Side connections

## Component Description
1 Service port For service update only. Do not use.
2 PC VGA jack Connect a 15-pin VGA cable from a
computer to this jack. For more
information, see "Connecting a computer"
on page 10.
3 PC Audio Connect a mini audio cable from your
computer sound card AUDIO OUT jack to
this jack.
4 AV1 and AV2 jacks Connect the video output from an external
video device to one of these jacks. For more
information, see "Connecting a VCR" on
page 8.
5 Composite audio Connect audio cables (L and R) from these
output jacks (L and jacks to an external analog audio amplifier
R) 1 and 2 or receiver.

Remote control

9
1
11
2
3
4
5
# Button
1
(Power)
2 Numbers/• (dot)
3 VOL+/VOL–
4 FREEZE
5 ENTER
6 MENU
7 HDMI, COMP,
VIDEO
8 MTS/SAP
1
2
3
4
5
6
7
8
10
Description
Press to turn on your TV. Press again to put
your TV in Standby mode.
Press to enter channel numbers or the
parental control password. Press the • (dot)
button to select a digital sub-channel.
Press to increase or decrease the volume.
Press once to view an image capture of the
display in a separate screen, while the
programming continues to run. Press again
to display the image capture using the
entire screen. To continue with the regular
programming display, press the button one
more time.
During TV viewing, press to switch to the
keyed in channel entry. In menu mode,
press to confirm selections in an on-screen
menu or to open a submenu.
Press to open the on-screen menu.
Press HDMI to select the HDMI 1 or HDMI 2
video input source.
Press COMP to select the Component 1 or
Component 2 video input source.
Press VIDEO to select Video 1 or Video 2 as
the video input source.
Press to enable the SAP (Second Audio
Program) function. This lets you listen to a
program using an alternative second
language. Function availability depends on
your TV provider.
5
12
13
14
15
16
17
18
19
20
21
22