Specifications; Legal Notices - Dynex DX-L321-10A User Manual

DX-L321-10A_09-0407_MAN_ENG_V3.book Page 24 Wednesday, May 13, 2009 11:38 AM
24
Recommended 1360 x 768 @ 60 Hz
PC
(reduced
compatibility
1366 x 768 @ 60 Hz
blanking )
1280 x 720 @ 60 Hz
Supported
H = 30-63 KHz
1024 x 768 @ 60 Hz
V= 50-75 Hz
720 x 400 @ 70 Hz
640 x 480 @ 60, 75 Hz
120 VAC, 60 Hz, 3A
Power
voltage
On <150 W (blue illumination)
Power
consumption
Off in energy <1 W
saving mode
Pre-adjusted to reduce blanking - 1366 x 768 @ 60 Hz
Preset timing
mode
Temperature 59 to 95°F (15 to 35°C) (humidity
Operating
<75%)
conditions
Relative 20 to 90% non-condensing (Ta <35%)
humidity
Altitude 0 to 6562 ft. (0 to 2000 m)
Temperature 68 to 140°F (20 to 60°C) (humidity
Storage
<35%)
conditions
Relative 10 to 90% non-condensing
humidity
Altitude 0 to 39370 ft (0 to 12,000 m)
Dimensions With base: 30.7 x 8.27 x 21.9 in
Physical
(WxDxH) (780 x 210 x 556 mm)

specifications

Weight (net) Without base: 30.7 x 4.17 x 20 in
(780 x 106 x 508 mm)
With base: 24.5 lb (11.1 kg)
Without base: 23.4 lb (10.6 kg)
UL/C-UL and FCC-B
Regulatory
compliance

Legal notices

FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation of this
product is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply within the limits
for a class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC warning
Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the user' s
authority to operate this equipment.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
Standard Television Receiving Apparatus — Appareil de réception
télévision ordinaire, Canada BETS-7 / NTMR-7
Notices
Specifications and features are subject to change without notice or
obligation.
For service and support call (800) 305-2204.
Legal notices