Setting The Sleep Timer; Adjusting Menu Settings; Selecting The Menu Language - Dynex DX-L321-10A User Manual

DX-L321-10A_09-0407_MAN_ENG_V3.book Page 21 Wednesday, May 13, 2009 11:38 AM

Adjusting menu settings

4 Press or to select Set Date or Set Time, then press ENTER.
The Set Date or Set Time box opens.
5 Press or to select the date or time segment you want to
change, then press or to adjust the setting. For Day, Hour,
and Minute settings you can use the number keys to input the
numerical values.
6 Press ENTER to apply the new clock setting.

Setting the sleep timer

You can specify the amount of time you want your TV to wait before it
automatically turns off.
To set the sleep timer:
1 Press SLEEP on the remote control. The Sleep Timer popup screen
opens.
2 Press the SLEEP button repeatedly to toggle each timer setting
on. Options include: 10, 15, 30, 45, 60, 90, 120, 180, and 240
minutes; and OFF (sleep timer is disabled). Your TV will
automatically turn off after the interval specified.
Note: To view these sleep timer settings, you can also press MENU, and
select the Settings, Sleep Timer submenu.
Adjusting menu settings

Selecting the menu language

To select the on-screen menu language:
1 Press MENU on the remote control, or MENU on the control
panel of your TV. The on-screen menu bar opens.
2 Press or to highlight Settings, then press ENTER. The
Settings menu opens.
3 Press or to highlight Menu Language, then press ENTER.
The Menu Language menu opens.
4 Press or to select the language you prefer, then press
ENTER to apply the new language setting.
Labeling an input source
You can add a label to an input source to make it easier to identify.
To label an input source:
1 Press MENU on the remote control, or MENU on the control
panel of your TV. The on-screen menu bar opens.
2 Press or to highlight Settings, then press ENTER. The
Settings menu opens.
3 Press or to highlight Input Label, then press ENTER. The
Input Label menu opens.
21