Connecting A Vcr - Dynex DX-L321-10A User Manual

DX-L321-10A_09-0407_MAN_ENG_V3.book Page 8 Wednesday, May 13, 2009 11:38 AM
8
2 Connect one end of a coaxial cable (not included) to the RF OUT
jack on the antenna or on the cable or satellite TV box. If you are
using an antenna with twin-lead cable, you may need a
300-75 ohm adapter (not provided) to connect it to the back of
your TV. Likewise, if you are using several antennas, you may
need a combiner (not provided).
RF coaxial cable (75 ohm)
VHF, UHF, or
combination
antenna
RF coaxial cable (75 ohm)
Twin-lead flat cable
VHF antenna
UHF antenna
Twin-lead flat cable
RF coaxial cable (75 ohm)
3 Connect the other end of the cable to the ANT/CABLE IN jack on
the back of your TV.
Antenna, cable
TV, or satellite box
Back of TV
ANT/CABLE IN
Notes:
Use a coaxial cable to eliminate interference and noise from radio waves.
Do not bundle the coaxial cable with the power cord or other cables.
If the antenna is not installed correctly, contact qualified service personnel
to correct the problem.

Connecting a VCR

ANT. jack
300-75 ohm Adapter
(not provided)
Home antenna
terminal (75 ohm)
Combiner (not provided)
RF coaxial cable (75 ohm)
To connect a VCR:
1 Make sure that your TV' s power cord is unplugged and the VCR is
turned off.
2 Connect an AV cable to the AV VIDEO OUT jack on the VCR.
Side of TV
Note: Cables are often
color-coded to connectors.
Connect yellow to yellow,
red to red, and white to
white.
3 Connect the other end of the cable to the Video1 or Video2 jack
on the side of your TV.
4 Connect an audio cable to the AV AUDIO OUT jacks on the VCR.
5 Connect the other end of the cable to the Video1 or Video2
audio in jacks on the side of your TV.
To play from the VCR:
1 Turn on your TV, then press INPUT. The INPUT SOURCE menu
opens.
2 Press or to select Video1 or Video2, then press ENTER.
Note: You can also press VIDEO once for Video1 or twice for Video2.
3 Turn on the VCR, insert a videotape, then press PLAY on the VCR.
Making connections
AV cable