Enabling The Infrared Sensor - Dell Latitude D620 User Manual

System Setup Program: Dell Latitude D620 User's Guide
Serial Port, which is located in the Onboard Devices category, allows you to map the serial port
COM address or disable the serial port and its address, which frees computer resources for another
device to use.

Enabling the Infrared Sensor

1. Locate Fast IR under Onboard Devices.
NOTE: Ensure that the COM port that you select is different from the COM port assigned to the
serial connector.
2. Press <Enter>.
3. Use the arrow keys to select the infrared COM port setting.
4. Press <Enter>.
5. Follow the instructions on the screen.
After you enable the infrared sensor, you can use it to establish a link to an infrared device. To set up
and use an infrared device, see the infrared device documentation and the Windows XP Help and
Support Center (see
Back to Contents Page
file:///S|/Integration%20Specialist/Hardware%20Docu...ation/Kim%20&%20Jay/Dell%20Laptops/D620UG/setup.htm (4 of 4) [12/4/2008 10:53:59 AM]
Windows Help and Support Center).