Deactivate The Active Zone Set; State Of The Default Zone - McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual

Configuring the Zone Set
4
Deactivate the
Active Zone Set
State of the Default
Zone
EFCM Basic User Manual
4-20
not activated on the fabric until the user activates the changes.
Instead, the changes remain local to the product.
Selecting the Cancel button clears all changes to the zone set. When
the Cancel button is selected, the configuration dialogs show active
zone set information.
The state of the zone set is shown in the Active State field. This field
has the following values:
• Active—Indicates that a zone set is active in the fabric. (The active
zone set may not be the same as the one shown in the Zone Set
panel.)
• Inactive—Indicates that no zone set is active on the fabric.
When a zone set is active, the Deactivate button is enabled. Select the
Deactivate button to make the zone set inactive. This action removes
the current zone set from the Fabric and places all attached devices
into the Default Zone.
The state of the default zone is shown in the Default Zone field. This
field has the following values:
• Enabled—Indicates that the default zone is enabled in the fabric.
All devices and ports not configured as members of the active
zone set are able to communicate.
• Disabled—Indicates that the default zone is disabled in the fabric.
All devices and ports not configured as members of the active
zone set cannot communicate.
When the default zone is enabled, select the Disable button to disable
it. When the default zone is disabled, select the Enable button to
enable it.
NOTE: Enabling the default zone while a zone set is active places all attached
devices not currently in an active zone into the default zone.