Factory Defaults
This chapter describes tasks to install, configure, and verify operation
of the Sphereon 4300 Fabric Switch using the EFCM Basic Edition
interface. The product can be installed on a table top, mounted in a
Fabricenter equipment cabinet, or mounted in any standard 19-inch
equipment rack.
Table 2-1
lists factory-set defaults for the product.
Factory-Set Defaults (Product)
Table 2-1
Item
EFCM Basic Edition interface user name (case sensitive)
EFCM Basic Edition interface password (case sensitive)
Customer-level password (maintenance port access)
Maintenance-level password (maintenance port access)
IP address
Subnet mask
Gateway address
Installation Tasks
Default
Administrator
password
password
level-2
10.1.1.10
255.0.0.0
0.0.0.0
Installation Tasks
2
2-1