McDATA 316095-B21 - StorageWorks Edge Switch 2/24 User Manual page 21

• Perform product operations and maintenance tasks, including:
— Enable unit beaconing, turn off the system error light, set the
product online or offline, and perform a configuration reset.
— Enable port beaconing, perform port diagnostics, and reset
ports.
— Retrieve dump files and retrieve product information files.
— Install optional feature keys.
— Configure product Internet Protocol (IP) addresses, names,
and SNMP settings.
— Install new versions of product firmware.
— Manage user access to features.
— Control product ports on an individual basis.
— Troubleshoot problems using event log and error status
indicators. Administrators and operators can access real-time
information about the product and fabric.
The EFCM Basic interface requires an industry standard web browser
of release level 4.0 or higher supporting HTML version 4.0 and
JavaScript version 1.0. For optimum results, the use of Microsoft's
Internet Explorer 6.x or Netscape Navigator 7.x or higher is
recommended. The browser software should be compliant with
HTML 4.0 and Javascript 1.0 for full functionality, optimum
performance, and best appearance.
At the web browser, the user enters the IP address of the product as
the Internet uniform resource locator (URL). When prompted at a
login screen, the user enters a user name and password.
NOTE: The default user name is Administrator and the default password is
password. The user name and password are case-sensitive. After the initial
log on, you will need to change the password for the Administrator.
Overview
Introduction
1-3
1