Selecting The Pc/Hdmi1 Audio Mode; Setting The Hdmi1 Audio Mode; Selecting The Lip Sync - Toshiba 37AV600E - REGZA -37" HD Ready LCD MultiSystem TV PAL/NTSC Owner's Manual

Selecting the PC/HDMI1 audio mode

You can select PC audio (- page 29) or HDMI1
audio when using this function.
1
Press MENU, then press I or i to display the
SETUP menu.
Language
Auto tuning
Manual tuning
AV connection
Picture Position
MENU
Back
2
Press u or U to select AV connection, then
press Q to display the AV connection menu.
AV connection
PC/HDMI1 audio
HDMI1 audio
Lip Sync
MENU Back
3
Press u or U to select PC/HDMI1 audio, then
press I or i to select PC or HDMI1.

Setting the HDMI1 audio mode

You can select sound of an HDMI or DVI device
connected to the HDMI1 input terminals
(- page 27) from three modes:
Auto, Digital or Analogue.
Note:
This function is available only when the
PC/HDMI1 audio mode is set to HDMI1.
1
Press MENU, then press I or i to display the
SETUP menu.
Language
Auto tuning
Manual tuning
AV connection
Picture Position
MENU
Back
28
Connecting your TV
SETUP
English
OK
OK
OK
OK
EXIT
Watch TV
PC
Digital
EXIT Watch TV
SETUP
English
OK
OK
OK
OK
EXIT
Watch TV
2
Press u or U to select AV connection, then
press Q to display the AV connection menu.
AV connection
PC/HDMI1 audio
HDMI1 audio
Lip Sync
MENU Back
3
Press u or U to select HDMI1 audio,
then press I or i to select Auto, Digital or
Analogue.

Selecting the Lip Sync

Lip Sync can synchronize the sound and picture.
This function is only available when Lip Sync
equipment is connected via HDMI.
1
From the AV connection menu, press u or U
to select Lip Sync.
2
Press I or i to select On or Off.
Note:
Disconnect the HDMI cable before changing the
Lip Sync setting. If the HDMI cable is connected,
a message will appear.
HDMI1
Auto
On
EXIT Watch TV